blaugelb
Silicone Oxym
The blaugelb Silicone Oxym is a one-component sealant based on oxym that cures neutrally. Designed for outdoor use, the blaugelb Silicone Oxym is non-fading and also weather and UV-resistant. Thanks to its good initial adhesion, it can usually be applied without primer to almost all substrates encountered in construction. It exhibits no embrittlement, chalking or hairline cracks and is non-corrosive.
Applications:
The blaugelb Silicone Oxym is especially suitable for sealing structural and construction joints as well as connecting joints between door/window frames and reveals made from masonry, concrete, plaster, cement etc., to meet the requirements of expert installation. blaugelb Silicone Oxym can be used for sealing glass/frames with coated wood, rigid PVC and anodised aluminium if compatibility with the system is assured.
Substrates:
Very good adhesion to the substrates normally encountered in building construction, such as concrete, porous concrete, plasterboard, plaster, masonry, fibre cement, glass, coated wood, rigid PVC, aluminium, metals, GRP, etc. Do not use on PE, PP, PTFE. Incompatibility may occur on natural stone, bitumen, tar or materials containing plasticisers (e.g. soft PVC, butyl, insulating coatings and foams, EPDM, APTK).
- Exceptionally suited for sealing of structural attachment, construction and expansion joints
- No chalking, embrittlement or hairline cracks
- Very good processability
- Very good adhesion to most conventional construction materials*
- Moisture and temperature-resistant
- Non-fading, weather and UV-resistant once cured
- Permanently elastic, compensates for unevenness and material movements
- Non-corrosive
- Coatability according to DIN 52452-A1
- Building material class E (DIN EN 13501-1)
*Carry out suitable pretests.
| Material base: | 1C polysiloxane (oxym) |
| Colour: | RAL 9010 white, colourless |
| Curing system: | Polymerisation by atmospheric humidity |
Building material class: DIN EN 13501-1 | Class E |
Curing speed: At 23°C and 50% rel. humidity | Approx. 2 mm / 24 hrs. |
Skin formation: At 23°C and 50% rel. humidity | Approx. 7 minutes |
Density: DIN 53479 | 1.03 g/ml (colourless) 1.25 g/ml (white) |
Shore A hardness: DIN 53505 | 22 ± 5 |
Max. permissible deformation: DIN EN ISO 11600 | 25 % |
Change in volume: EN 15651-1:2012 | Up to -10 vol.% |
Elongation at break: DIN 53504 | 600 % |
Elastic recovery: ISO 7389-B | > 90 % |
| Processing temperature: | Ambient: +5°C to +35°C Substrate: +5°C to +35°C |
| Temperature resistance: | From -60°C to +150°C |
| Resistance: | Non-fading, UV and weather-resistant |
| Storage life: | 12 months in unopened pack at +5°C to +25°C |
| Delivery form: | 310 ml cartridge / 600 ml bag |
The information provided in this document corresponds to the information and technical details available to the best of our knowledge. However, this does not constitute a guarantee pursuant to section 443 of the German Civil Code (BGB). Our processing instructions are to be considered only as general guidelines and may differ in the individual case due to the range of possible uses and applications. They do therefore not automatically exempt the user from carrying out their own tests. We reserve the right to make technical modifications and enhancements at any time.