blaugelb
Foil Adhesive Hybrid grey
The blaugelb Foil Adhesive Hybrid grey is a one-component, permanently elastic adhesive on a hybrid polymer basis for bonding blaugelb foils to
structures.
Designed for indoor and outdoor use, the blaugelb Foil Adhesive Hybrid grey is water-resistant and also weather and UV-resistant. Thanks to its good initial adhesion, it can usually be applied without primer to almost all – even wet – substrates encountered in construction. A softer formulation has been defined for ease of processing.
Applications:
The blaugelb Foil Adhesive Hybrid grey is especially suitable for bonding fleece-backed blaugelb foils when connecting door/window frames to
reveals made from masonry, concrete, plaster, cement etc., to meet the requirements of expert installation and airtightness.
Substrates:
All substrates normally encountered in building construction, such as concrete, porous concrete, plasterboard, plaster, masonry, fibre cement, wood, rigid PVC, aluminium, metals, GRP, etc. Do not use on bitumen, PE, PP, PTFE or silicones. Incompatibility may occur on porous natural stone (e.g. sandstone, marble etc.) and on plastics containing plasticisers (e.g. soft PVC, butyl rubber, APTK). EPDM foils can be bonded but incompatibility is possible due to the plasticiser content in the foils.
- Outstandingly suitable for bonding fleece-backed blaugelb foils
- Very good processability thanks to softer formulation
- Moisture and temperature-resistant
- Weather and water-resistant once cured
- Can be used from as low as 0°C (ambient temperature and substrate, ice-free)
- Permanently elastic, compensates for unevenness and material movements
- Silicone, isocyanate and solvent-free
- Non-corrosive
- Almost odourless
- Very easy to plaster over once cured
- Suitable for all standard construction surfaces*
- Building material class B2 (DIN 4102)
- Tested to be very low in pollutants according to EMICODE EC1 Plus
*Carry out suitable pretests.
| Material base: | 1C hybrid polymer |
| Colour: | Grey |
| Curing system: | Polymerisation by atmospheric humidity |
Building material class: DIN 4102-4 | B2 |
Curing speed: At 23°C and 50% rel. humidity | Approx. 2 mm / 24 hrs. |
Skin formation: At 23°C and 50% rel. humidity | Approx. 10 minutes |
Density: DIN 53479 | 1.45 g/ml |
| Shore A hardness: | 50 ± 5 |
Max. permissible deformation: DIN EN ISO 11600 | 25 % |
Change in volume: DIN EN ISO 10563 | -2 to -3 vol.% |
Elongation at break: DIN 53504 | > 900 % |
Elastic recovery: ISO 7389-B | > 70 % |
| Solvent content: | Free |
| Isocyanate content: | Free |
| Processing temperature: | Ambient: 0°C to +40°C Substrate: 0°C to +35°C |
| Temperature resistance: | From -40°C to +90°C |
| Moisture resistance: | Waterproof |
| Ecological report: | EMICODE EC1 Plus |
| Plastering over: | Very easy to plaster over once cured |
| Storage life: | 12 months in unopened pack at +5°C to +25°C |
| Delivery form: | 600 ml tubular bag |
The information provided in this document corresponds to the information and technical details available to the best of our knowledge. However, this does not constitute a guarantee pursuant to section 443 of the German Civil Code (BGB). Our processing instructions are to be considered only as general guidelines and may differ in the individual case due to the range of possible uses and applications. They do therefore not automatically exempt the user from carrying out their own tests. We reserve the right to make technical modifications and enhancements at any time.