blaugelb
Acrylic Sealing Compound
blaugelb Acrylic Sealing Compound white 600 ml is a one-component, neutral crosslinking sealant on an acrylic dispersion basis for the expert sealing of low-movement joints. Thanks to its good initial adhesion, it can usually be applied without primer to almost all substrates encountered in construction. It exhibits good adhesion to porous, absorbent substrates as well as aluminium. blaugelb Acrylic Sealing Compound can be painted over after curing (note elongation). A skin forms after approx. 20 minutes.
Applications:
blaugelb Acrylic Sealing Compound white 600 ml is particularly suitable for the permanent sealing of structural, construction and connecting joints with low movement (< 10 %) on standard construction substrates, even when porous. Joints between window and door frames, at window sills, roller shutter cases and skirting boards and cracks in masonry, concrete and plaster can be sealed with blaugelb Acrylic Sealing Compound white 600 ml. blaugelb Acrylic Sealing Compound white 600 ml is recommended for use indoors. It is not suitable as a glazing sealant or for joints permanently exposed to water.
Substrates:
Very good adhesion on porous substrates such as concrete, porous concrete, plasterboard, plaster, masonry, stone, fibre cement, aluminium.
Do not use on natural stone, glass, bitumen and metals susceptible to corrosion, PE, PP, PTFE. Incompatibility may occur in the event of contact with bitumen, tar or materials containing oils, solvents or plasticisers, e.g. soft PVC, butyl, chloroprene rubber (neoprene), EPDM, APTK. Not recommended for tiles, ceramic or marble.
- Exceptionally suited for sealing structural attachment and construction joints indoors
- Very good processability
- Solvent-free, silicone-free
- Colourfast and waterproof after curing
- Very good adhesion to most porous and even slightly moist conventional construction materials*
- Moisture and temperature-resistant once cured
- Non-fading once cured
- Can be painted over with suitable paints after curing
- Building material class E (DIN EN 13501-1)
- Tested to be low in pollutants according to EMICODE EC1 Plus
*Carry out suitable pretests.
| Material base: | 1C acrylic dispersion |
| Colour: | White |
| Curing system: | Curing through evaporation of water |
| Building material class: DIN EN 13501-1 | Building material class E |
| Skin formation: | Approx. 20 minutes at +23 °C and 50 % RH |
| Density: | 1.65 g/ml |
| Shore A hardness: ISO 868 | Approx. 30 +/- 5 |
| Max. permissible total deformation: ISO 11600 | Approx. 10 % |
| Change in volume: DIN 52451 | Approx. -15 % |
| Processing temperature: | Ambient: +5 °C to +30 °C Substrate: +5 °C to +30 °C |
| Temperature resistance: | From –20 °C to +80 °C |
| Resistance: | Colourfast and moisture-resistant once cured |
| Storage life: | 18 months in unopened pack at +5 °C to +25 °C |
| Delivery form: | 600 ml tubular bag |
The information provided in this document corresponds to the information and technical details available to the best of our knowledge. However, this does not constitute a guarantee pursuant to section 443 of the German Civil Code (BGB). Our processing instructions are to be considered only as general guidelines and may differ in the individual case due to the range of possible uses and applications. They do therefore not automatically exempt the user from carrying out their own tests. We reserve the right to make technical modifications and enhancements at any time.