blaugelb
2C Frame Foam Rapid Pro
The blaugelb 2C Frame Foam Rapid Pro is a two-component PU assembly bonding foam that hardens without blowing agent. Curing occurs very rapidly as a result of combination of the two components in the static mixing tube. During the spreading time of only approx. 20 minutes, only spreaders need be used; no further mechanical attachment is required when assembling interior doors.
Applications: Bonding – sealing
The blaugelb 2C Frame Foam Rapid Pro is ideal for rapid assembly of door frames on interior and exterior doors (not for assembly without any additional mechanical attachment). Suitable for the attachment of wooden door cases, window sills, stair treads. The maximum joint width for the assembly of door frames is 30 mm. One dual cartridge of blaugelb 2C Frame Foam Rapid Pro is sufficient for the assembly of 1 to 2 internal door cases, depending on the joint dimension.
The blaugelb 2C Frame Foam Rapid Pro exhibits outstanding adhesion to all standard construction surfaces (except PE, PP, PTFE, silicones, oils, greases, mould release agents or similar materials). Carry out suitable pretests.
Once cured, the foam is predominantly closed, rot-proof and non-ageing, though not if exposed to UV radiation.
- Extremely rapid curing without moisture
- Without propellant
- High bond strength
- Can be cut after approx. 5 minutes
- Can be despread after approx. 20 minutes
- Moisture and temperature-resistant
- Manufactured under an ISO 9001:2008-compliant quality system
- Suitable for all standard construction surfaces*
- Building material class B2 (DIN 4102-1)
- Tested to be low in pollutants according to EMICODE EC1 Plus
*Carry out suitable pretests.
| Apparent density: | Approx. 46 kg/m³ |
| Cell size/consistency: | Approx. 70 – 80 %, closed |
| Non-tacky: | Approx. 1 min (30 mm section) |
| Can be cut: | Approx. 5 min (30 mm section) |
| Fully load bearing: | Approx. 2 h (30 mm section) |
| Can be despread: | Approx. 20 min (30 mm joint) |
| Yield: | Up to 5.5 litres of foam |
Processing temperature of can: min / max / ideal | +10°C / +30°C / +20°C |
Processing temperature of surface: min / max / ideal | +10°C / +35°C / +20°C |
Processing temperature of surroundings: min / max / ideal | +10°C / +35°C / +20°C |
| Post-elongation: | None |
Elongation at break: DIN 53571 | Approx. 25 % |
Shear strength: DIN 53427 | Approx. 0.14 N/cm² |
Pressure resistance: DIN 53421 | Approx. 0.3 N/cm² |
Thermal conductivity: DIN 52612 | Approx. 0.033 W/(m*K) |
Water absorption: DIN 53428 | 2 vol.% |
| Water vapour permeability: | 70 g/m² in 24 h |
Permanent temperature resistance: cured foam | -40°C to +90°C |
Short-term temperature resistance: cured foam | +120°C (max. 1 h) |
Building material class: DIN 4102-1 | B2 |
Storage life: with dry, cool storage | 9 months |
| Colour: | Beige |
The information provided in this document corresponds to the information and technical details available to the best of our knowledge. However, this does not constitute a guarantee pursuant to section 443 of the German Civil Code (BGB). Our processing instructions are to be considered only as general guidelines and may differ in the individual case due to the range of possible uses and applications. They do therefore not automatically exempt the user from carrying out their own tests. We reserve the right to make technical modifications and enhancements at any time.