blaugelb
2C EPOXY Metal Adhesive
The blaugelb 2C EPOXY Metal Adhesive is a two-component, viscoplastic adhesive on an epoxy resin basis for bonding metal. The blaugelb 2C EPOXY Metal Adhesive is weather and moisture-resistant. Thanks to its good initial adhesion, the bond can withstand light loads after about 4 hours.
The blaugelb 2C EPOXY Metal Adhesive forms a tough but flexible adhesive layer with high strength, but still retains a certain elasticity when cured. With the supplied static mixing tube, the blaugelb 2C EPOXY Metal Adhesive is ready to use straight away and easy to use. The easy processing is supported by its very good filling and flow properties.
Applications:
The blaugelb 2C EPOXY Metal Adhesive is used for bonding aluminium corner angles and profiles in aluminium window and door construction and in general metal construction. The blaugelb 2C EPOXY Metal Adhesive is particularly suitable for bonding bare aluminium as well as anodised or varnish-coated aluminium profiles.
Substrates:
The blaugelb 2C EPOXY Metal Adhesive achieves very good adhesion
values on the materials customarily used in window construction, such as aluminium, wood, GRP, metals, etc.
- Fast curing of components
- Particularly good adhesion to bare aluminium, anodised and
- varnish-coated, wood, metal and GRP*
- Tough but flexible adhesive film, viscoplastic when cured
- Very good filling and flow properties
- High moisture and weather resistance
- UV-resistant
- Suitable for use on coated and anodised profiles
- Ready to use straight away with the supplied static mixing tube
- Withstands light loads after just 4 hours
- Isocyanate-free
*Carry out suitable pretests.
| Material base: | Epoxy resin, 2-component (epoxy resin and amine hardener) |
| Colour: | White |
| Curing system: | Reaction of the two components |
| Mixing ratio of resin to hardener: | 1:1 by volume |
| Pot life at +20 °C: | Approx. 60 minutes |
Density: DIN 53479 | 1.30 g/cm³ (mixture) |
Shore D hardness: DIN 53505 | Approx. 65 |
| Film: | Tough but flexible when cured |
Tensile shear strength: DIN 53283 | 20 N/mm² |
| Solvent content: | Free |
| Processing temperature: | +5 °C to +25 °C |
| Moisture resistance: | Very good |
| Storage life: | Min. 15 months in unopened pack at +5 °C to +25 °C |
| Delivery form: | 510 g / 380 ml dual cartridge with accompanying static mixing tube |
| Hazard class acc. To VbF (German regulation concerning inflammable liquids): | None |
The information provided in this document corresponds to the information and technical details available to the best of our knowledge. However, this does not constitute a guarantee pursuant to section 443 of the German Civil Code (BGB). Our processing instructions are to be considered only as general guidelines and may differ in the individual case due to the range of possible uses and applications. They do therefore not automatically exempt the user from carrying out their own tests. We reserve the right to make technical modifications and enhancements at any time.