blaugelb
FLK Primer Special
The blaugelb FLK Primer Special is an adhesive agent for difficult substrates such as various plastics (FPO, TPO, EVA) and rubber (EPDM) with the blaugelb FLK Sealing System. Only for use in combination with blaugelb FLK Liquid and blaugelb FLK Liquid Corner.
Thanks to its rapid drying, the blaugelb FLK Primer Special can be coated over quickly.
Thanks to its liquid form, the blaugelb FLK Primer Special can be applied with a brush or roller and can be quickly and easily spread. A reliable substrate adhesion is thus achieved.
Not suitable for substrates made of bitumen.
- 1C product, ready for use, very good processability
- Adhesive agent specifically for blaugelb FLK Liquid and
- blaugelb FLK Liquid Corner on problematic substrates
- Small amount required, very efficient
- Easily dosed
- Rapid further processing
- Part of the blaugelb FLK Sealing System
- Suitable for various plastic and rubber surfaces*
* See “Substrate preparation” list, carry out suitable pretests
| Processing temperature: (substrate and surroundings) | +5 °C to +35 °C |
| Substrates: | EPDM, FPO, TPO, EVA Note: Not suitable for bitumen |
| Material consumption: | Approx. 40 – 80 ml/m² |
| Can be coated over after: | Approx. 20 minutes at 20 °C |
| Rainproof after: | Approx. 20 minutes at 20 °C |
| Colour: | Yellowish |
The information provided in this document corresponds to the information and technical details available to the best of our knowledge. However, this does not constitute a guarantee pursuant to section 443 of the German Civil Code (BGB). Our processing instructions are to be considered only as general guidelines and may differ in the individual case due to the range of possible uses and applications. They do therefore not automatically exempt the user from carrying out their own tests. We reserve the right to make technical modifications and enhancements at any time.